Hobby update: Chainrasp Horde 1/10
As I continue to paint models for Warzone Houston I have decided that I must grind through all 60 of my Chainrasp Horde. In theory these models should paint quickly because I am using lots of shades and technical paints. However after I had built and primed the 60 models I noticed that the seam on their backs was a bit more obvious than i thought. So I filled all the seams again and hit them with a little more primer over the sanded area. As I started to get to painting them I noticed about 1/3 of them have frosting on them. I took them all and hit them with some water and a toothbrush to get as much off as I could. However there are spots that are still chalky. I am under a time crunch so the plan is to complete all the figures and my display board then if I have time come back and build 10-20 chainrasps and replace the worst ones.
I decided to paint these in groups or like models. So 10 batches of 6. This will speed up the process just a touch.
Color Guide:
- Prime
- Flat White Krylon
- Ghost Body -I based the colors in the areas listed then used the shades to bled them together, It mostly took 2 coats to get a nice blend–
- Mid
- base
- nihilake oxide
- base
- bottom
- Base
- Hexwraith Flame
- Base
- Top
- shade
- nuln oil
- shade
- Mid
- shade
- nihilakh oxide
- shade
- bottom
- shade
- Hexwraith flame
- shade
- all
- light dry brush
- ulthuan grey
- light dry brush
- Bottom
- spot
- lamenters yellow
- spot
- Middle
- edge HL
- Ulthuan grey
- edge HL
- Mid
- shroud
- Base
- Nighthaunt gloom x2
- Shade
- Nuln oil
- edge
- Astronomican grey
- Base
- wood
- Base
- mornfang brown
- shade
- nuln oil
- dry
- Zandri Dust
- Base
- blade
- Base
- leadbelcher
- shade
- Nuln oil
- dry
- Mithrial silver
- technical
- Orange rust “forge world”
- Base
- Tombstone
- base
- dawnstone
- shade
- Nuln oil
- dry
- Astronomican
- base
Learn more about Chainrasp Horde here: Link